Forensic, General & Medical
Expert Witnesses

Quality Fade in China


     By Rosemary Coates Chinese Imports Expert Witness, Chinese Manufacturing Expert Witness, Supply Chain Expert Witness

PhoneCall Rosemary Coates is a Global Supply Chain Management Consultant and Author at (408) 605-8867


Expert Witness: Rosemary Coates
Quality Fade is the single biggest issue in Chinese manufacturing. Quality Fade, the process of quality degradation over time, is the single biggest issue in low cost manufacturing countries. It happens frequently in China where manufacturing processes are immature and competitive pricing drives the profits to extremely low levels. It also happens in Vietnam, Indonesia, Bangladesh and other low-cost countries.
You have probably noticed quality fade, but didn’t know what to call it, or understand how it happened. Maybe you noticed a plastic shampoo bottle that seemed too thin. Maybe that hand-held electronic game you put in your son’s Christmas stocking stopped working after a few days. Maybe the zipper in your pants broke after a few zips.

Quality fade is a particular problem for products coming from China, where nearly 40% of the world’s production now takes place. This startling fact about the tremendous volume of goods produced in China is evidenced at the drug store, department store, big box retailer and the grocery store. The ubiquitous “Made in China” label can be found everywhere. These products are initially equal or superior in quality to Western-made goods, but over time, quality begins to fade. Sometimes poor quality is just an inconvenience and sometimes it is downright dangerous.

Products manufactured or assembled in low cost countries, aren’t designed to break or poison anybody. In fact, typically when a new contract is signed and specs are given for initial production at a new supplier, importers of Chinese goods are thrilled. The vendor’s service levels are outstanding, the quality is above expectations and the future looks bright. Customers are pleased with the price of initial production, and they assume that it will last. New importers feel like they’ve hit a home run with low-cost country sourcing.

Don’t be fooled! The initial production runs are often not sustainable. Over time, degradation in quality is likely. For example, the label on your product becomes 10 percent smaller, your 100 ml product may actually be 99 ml, non-toxic paint you specify for toys may become fast-drying lead paint, the 5/8 inch seam may become 3/8 inch.

The China Price

Business deals in China are so competitive, that a manufacturer will often quote a price below their actual production cost just to attract buyers to an irresistible deal. This is what is commonly known as “The China Price.” Once the contract is signed, the manufacturers look for ways to reduce costs and turn a profit. Typically, this results in short-cutting processes, reducing size or volume of the product and using cheaper ingredients or materials.

Typical production lot sizes in low-cost manufacturing countries are multiples of thousands. This is what low-cost manufacturers are good at: producing huge volumes and repeatable production. Once manufacturing processes are learned, they simply repeat the process thousands or hundreds of thousands of times. Even a small reduction in cost makes a huge difference over the enormous volumes.

Emphasis on Cutting Costs

Over time, Western buyers expect the learning curve to improve production quality. This is not the way a typical Chinese manufacturer thinks. Instead of continuous process improvement and learning curve efficiencies, emphasis is placed on cutting costs.

For a manufacturer in a low-cost country, as soon as the contract is signed and production begins, cost reductions start. This typically involves using “shadow factories” where longer working hours, less safety measures, and jammed dormitories result in lower overall production costs. Costs for shadow factories are averaged with the cost of five-star factories to achieve a lower overall total cost.

Cost reductions may include the use of cheaper materials and skipped process steps, regardless of the production specs and the contractual language. The Chinese manufacturer knows he must reduce costs because the “China Price” is below his costs. This slow degradation of quality may not be noticed for a long time or until something breaks, someone is poisoned or someone is hurt.

Chinese New Year

Just before Chinese New Year (typically 2 weeks in February), and just afterward, you may also experience degradation in quality. Just like the Western Christmas-New Year holiday period, the Chinese New Year is a celebration with family that lasts about 2 weeks. During this time, migrant factory workers travel home and factory towns shut down. During the few weeks before the holiday, Western importers pressure the factories to complete production runs before the factory closes. The increase in schedule pressure causes long working hours and a focus on moving as much production through the factory as possible. This results in an increase in production errors and overall relaxation of quality standards. Volume and schedules become the priority, not quality.

The few weeks after Chinese New Year are also problematic. Many migrant workers go home for the holidays and never return to the factories. The result is 30%- 40% turnover of factory workers, and many new trainees. Quality suffers during the post-holiday ramp-up time for new workers.

So What Should You Do?

Even though you have done your homework, checked factory references, visited and audited the factory, and viewed a sample production run, you may still suffer from production quality fade. If you are sourcing from a low-cost country, you must be vigilant about quality over the entire term of the relationship.

When you are negotiating the initial deal, try to verify the true cost of production, and fight the urge to force prices too low. If you want to avoid constant cost-cutting by the
manufacturer, you must be willing to pay reasonable prices.

Start with the initial engineering and design specs. Be very specific about every part and material that is to be used in your product and then explain that the products will be carefully inspected for conformity prior to final payment for the goods.

Westerners often leave production details off of the design, assuming that manufacturing engineering will complete the specifications. It is highly unlikely that this final engineering step will take place in low-cost country manufacturers. Factory management will view this lack of detail as an opportunity to substitute lower quality parts.

You must assume a supervisory quality role over the factory to guard against substitutions and short-cuts in production. You should visit (both announced and unannounced) at least once per quarter. You might consider hiring an in-country person who speaks the local dialect to sit in the factory and monitor the processes.

You may also want to hire a QA lab such as Bureau Veritas, to test the finished product. This may be particularly important for food products and toys. The problem with this approach though, is that it is quite expensive and you have to ask for specific tests. If you do not know what specific ingredient you are looking for, you won’t know what to test.

Fundamentally, remember that unlike the Western world, quality is the buyer’s responsibility in the low-cost country manufacturing world. You must take responsibility for verifying quality and fighting quality fade.

Copyright 2012 Rosemary Coates

ABOUT THE AUTHOR: Rosemary Coates is a Global Supply Chain Management Consultant and Author
Based on her 25 years of supply chain experience, much of it spent living and working across Asia, Rosemary Coates has become an expert in sourcing and manufacturing in China. Ms. Coates is the President of Blue Silk Consulting and the author of Amazon Top Seller: "42 Rules for Sourcing and Manufacturing in China".

Copyright Rosemary Coates

More information about Rosemary Coates


While every effort has been made to ensure the accuracy of this publication, it is not intended to provide legal advice as individual situations will differ and should be discussed with an expert and/or lawyer.
For specific technical or legal advice on the information provided and related topics, please contact the author.

Find an Expert Witness