Corrosion Expert Witnesses

Paul Chen is a consumer product (non-food) safety, regulatory and retail compliance, quality assurance and control, 3rd party lab testing / inspection / auditing, CPSC (Consumer Product Safety Commission), CPSIA (Consumer Product Safety Improvement Act), Federal / State / Local law compliance...

Rapperport Associates provides forensic engineering services: fire and explosion investigation, failure analysis and accident reconstruction services. The company has built a reputation for superior work product and professional integrity since 1974.

Dr. George "G" Yanulis, D.ENG. provides expert testimony, reports, and opinions on medical device liability cases and limits his services for attorneys who have already been retained for active cases.; He is a Cardiovascular Device Product Development and Research Engineer and possesses a MEng, MS,...

J. B. Giacoma Consulting, LLC provides consulting and evaluation services for Plumbing/Mechanical related projects. Work with attorneys and other clients to resolve case issues. Construction defects - Personal liability claims. Construction claims - Cost estimating (Plaintiff or defense).

EFI Global is a full-service engineering, fire investigation, environmental, health and safety, and specialty consulting firm. Over the last four decades, we have grown from a boutique firm to become a recognized leader in engineering failure analysis, origin and cause investigations, and...

Over the past two decades, Real World Forensic Engineering has provided engineering consulting to industry and government labs, as well as litigation support services to both plaintiff and defense attorneys practicing in the following areas of law:; · Product Liability / Personal Injury Law:...

Dr. John D. Jarrell, PhD, PE, President of Materials Science Associates, leads a team of experienced multi-discipline engineers and medical scientists specializing in the analysis of complex designs and failures involving materials, mechanical and biological systems. He has been a licensed...

J.E.I. Metallurgical, Inc., a product liability metallurgical expert witness firm headed by Dr. R. Craig Jerner, Ph.D., PE offers over 40 years of professional experience in Accident Investigation, Products Liability, Metallurgical Failure Analysis, Litigation Consulting, and Expert Witness...

Dr. Reitz specializes in metallurgical investigations to determine if failures and accidents were caused by abuse, use of wrong material, improper heat treatment, design errors, or other reasons. Engineering analyses, calculations, physical testing and technical literature reviews can be performed...

Bison Engineering, Inc. is contacted by legal professionals who require a high degree of excellence and integrity to scientifically conduct investigations to determine the cause of destructive events. Bison specializes in forensic engineering and failure analysis services to the legal, gas,...

Ron George, president of Plumb-Tech Design & Consulting Services LLC, has been an expert in designing, investigating and providing forensic technical reports for plumbing and mechanical systems since 1978. Since the mid 1990's he has been providing forensic investigations as an expert for...

Termine Group, LLC is a management consulting firm specializing in expert litigation, strategy development, mergers & acquisitions, and business intelligence for the chemical and energy industry. We provide plaintiff and defense services, develop growth strategies, assist with acquisition...

Aerosol Technical Solutions, LLC (ATS) offers 29 years of aerosol industry experience and provides a broad range of aerosol technical services including: aerosol R&D, quality systems & audits, component specification, contract packager management, as well as expert witness and failure...

Scientific and Forensic Services Inc. since 1980 and under the guidance of Dr. Joseph H Guth, Cert. Industrial Hygienist, chemist and president has provided teams of independent experts as well as his own broad expertise to hundreds of attorneys in thousands of cases and insurance claim...

EAG Laboratories has been in business for 35 years in the Los Angeles area serving legal clients as expert witnesses for failure analysis in the areas of metallurgy, electronics and chemistry.EAG has an extensive laboratory testing facility with Ph.D. experts. We have the experience in failure...

Tipton Metallurgical Consultants is an engineering consulting firm with over 26 years of experience in failure analysis, alloy selection and process evaluation of Ferrous and Non-Ferrous alloys. It has a fully equipped lab for mechanical testing and metallurgical evaluation. We are dedicated to...

E4 Consulting Inc. provides engineering solutions for industry and the legal communities. We serve clients throughout the nation, meeting the highest standards of technical quality and customer service. We specialize in areas of materials and metallurgical engineering relevant to industrial...

O'Donnell Consulting Engineers, Inc. performs failure analysis, fire and explosion analysis, and product liability investigations. We are a team of multi-disciplined engineers, dedicated to solving simple to complex technical issues. Our extensive engineering design and analysis experience gives us...

Forensic Analysis & Engineering Corporation offers specialists in forensic analysis, forensic investigation, forensic science, carbon monoxide poisoning, forensic psychology, forensic evidence, product liability, defective product determination, boating safety, structural analysis, brain injury...

RNDT, Inc. Non-destructive Testing & Research Services is a privately owned and independently operated commercial testing and research laboratory located in Johnstown, Pennsylvania. We supply non-destructive testing and research services to all industries on all materials and components...

Matco Associates, Inc. is a leading independent consulting, engineering, and testing firm specializing in the fields of failure analysis, corrosion, metallurgical engineering, cathodic protection systems, materials selection, and coatings.

Board certifed forensic marine engineer with over 25 years experience and over 600 forensic cases involving the design, construction, operation and repair of marine structures and vessels of all types. Former ship's engineering officer, U.S. Navy port engineer, marine underwriter's surveyor, safety...

Aviation Safety Audits, Risk Managment and Loss Control, accident prevention, investigation, and reconstruction for airlines, airports, manufacturers, service firms, and operators of small and large aircraft and helicopters. FAA Engineering and Enforcement matters, QC for TC/STC/PMA,...

BPP Technical Services founded in 1981. BPP-TECH, an independent engineering Company specialising in engineering analysis and design. Employing teams of engineers and individual specialists providing risk assessment and engineering support services for litigation including failure investigation,...

Expert witness and consultant for oil & gas facilities engineering, maintenance, operation, troubleshooting and failure investigations. Facilities include marine oil & gas terminals, onshore and offshore pipelines, rotating equipment, fixed equipment such as various storage tanks, heat...

Over 30 years’ experience; providing exemplary EH&S consulting and expert witness services to our valuable clients.

Robson Forensic is a multidisciplinary Forensic Firm offering a broad range of specialty experts. The majority of our technical experts are full-time employees; this is an important distinction for both our experts and our clients.

P.E. Licensed Metallurgical Engineers with 47 yrs materials selection, failure analysis, corrosion, welding and NDE experience in the Oil & Gas, Petrochemical and Power industries. We investigate material failures and determine testing protocol that often results in canceled law suits.

Professional conveyor S.M.E. Subject Mater Expert provides non-bias reporting and offers opinions to legal counsel as an expert witness of Conveyor System and Bulk handling equipment accidents or incidents and if requested reconstruct situations showing root cause analysis.

Experienced expert witness in paints, metal coatings, corrosion, plastics, pretreatments for metals and plastics, fluoropolymers, metal and plastic packaging, nanotechnology, materials science, polymer science. 40 years technical experience. Ph.D in Materials Science from Lehigh University....

HG Cornerstone is a professional services consulting firm, serving its clients nationwide. We are problem solvers in construction, real estate, & property damage insurance claims, offering:; -FORENSIC ENGINEERING; -EXPERT WITNESS SERVICES; -CONSTRUCTION CONSULTING; -PROPERTY & CASUALTY...

WDP & Associates is a diversified consulting engineering firm providing specialized structural and architectural engineering, geotechnical engineering, and construction inspection and material testing services. Through the broad range of services we offer and our steadfast commitment to client...

Applied Materials Technologies Inc. (AMTI) is a multi-disciplined engineering, design and consulting firm with expertise in the following areas:; Structural, Mechanical & Electrical Engineering; Metallurgical & Materials Engineering; Welding Engineering; Marine Engineering; Forensic...

Read Consulting offers the unique combination of education, extensive manufacturing experienceand significant courtroom experience.

Professional support, consultation and expert services for Attorneys, Insurance Companies, Judicial Systems, Law Enforcement Agencies, Municipalities, Automobile Truck Heavy Equipment Manufacturers, Law Firms and affiliated Legal Entities, Adjusters, Appraisers, National and International...

Justin Hall, PE is a seasoned expert witness for attorney's, insurance companies, contractors and even homeowners in some cases. I service ALL of ARKANSAS.

CASE Forensics (CASE) provides forensic and consulting engineering services, expert scientific analysis, litigation support, and expert testimony. Services include: fire and explosion investigations, product failure analysis, accident reconstruction, construction defect investigations, building...

Since 1993, ACS has provided a wide range of construction consulting services for commercial and residential properties involving insurance claims for all perils.; Our damage assessment experience includes, claims resulting from fire, water, flood, tornadoes, hurricanes, mold, subsidence,...

System Engineering And Laboratories (SEAL) with over 30 years’ experience, offers services including forensic engineering, expert witness, certified fire, arson, and accident investigations, safety engineering, and product testing. We provide these services to insurance claims, manufacturing,...

Group of engineers and certified technicians specialising in field of facility pro-active maintenance: electrical, mechanical, piping and structural